HexBay™
Hexagon LED grid ceilings for showrooms, open spaces and workspaces. Six kits, two builds, one plug.
One continuous line of light.
Tubes run almost end to end and clear connectors carry the light to each joint, so the grid reads as unbroken lines across the ceiling.
Push in until it clicks.
Brass pins on every tube end, brass sockets in a clear PC connector. One push connects and holds each tube. No tools to join the tubes.
Plugs into a ceiling outlet.
Every kit ships with a 5 ft cord and plug; Border kits have two. An electrician can hard-wire it instead.
Rated for damp locations.
IP44 splash resistant, for detailing bays, shops and garages. Indoor use.
Six kits, or a layout for your room.
This bay runs a custom layout over one car. Pick a standard kit, or send the room size and we draw the grid.
Request a quoteSame grid, same light.
Choose the body.
Both builds use the same connectors and layouts and put out the same light. The difference is the tube body. The PC build is light and quick to order. The aluminum build puts the same opal lens on a metal housing that is stiffer, ages better and is finished in silver.
Tap any drawing to switch to the model.
PC build Quote on request
An all-polycarbonate tube with an aluminum LED board inside. Lightweight and quick to hang.
- Housing
- Polycarbonate, white
- Lens
- Opal PC
- LED board
- Aluminum PCB
Aluminum build Quote on request
A silver aluminum housing over the same opal lens. Made for floors that are hard on fixtures and rooms where the ceiling is part of the look: dealerships, gyms, showrooms, multi-site retail.
- Stays straightA rigid metal body holds a clean line on every run, including suspended grids and hot ceilings under a roof.
- Ages betterAluminum won't yellow or turn brittle with years of light and heat, and it draws heat away from the LED board.
- A metal finishSilver aluminum with crisp, even edges. It reads as a fixture, next to stainless, glass and polished concrete.
- Housing
- Aluminum, silver
- Lens
- Opal PC
- LED board
- Aluminum PCB
Identical in both: sizes and layouts · 6 W per 18″ tube, 16 W per 46″ frame tube · 120 lm/W · 6500 K · CRI >80 · 100–277 V AC · IP44 splash resistant · clear PC connectors with brass pins.
Tubes push into connectors.
That is the whole install.
- Integrated LED tube18″, 6 W, driver inside. Border kits add 46″, 16 W frame tubes.
- 120° V connectorEvery outer corner. Clear PC block, brass pins.
- 120° Y connectorEvery inner junction. One Y per kit takes the power cord.
- 5 ft cord with plugPlugs into a ceiling or wall receptacle. Wire nuts in the box for a hard-wired install by an electrician.
Push in until it clicks.
Each tube end carries two brass pins and a latch tab. The clear sleeve takes the pins in brass sockets and the tab seats in a window in its floor, so one push makes the electrical connection and holds the tube.
Each tube goes all the way in, and the lit lens runs almost to its end. Seen through the clear sleeve, the light carries up to the hub, so a lit grid reads as one continuous line with only a small dark point at each joint.
The clear PC also shows whether each tube is fully home.
Drawing · hover for modelModel · rendered at true scale- 120° VOuter corner
- 120° YInner junction · power entry
- 180° IFrame straight
- 90° LFrame corner
- TFrame tee · 2nd cord
- 360° XFour-way, custom grids
Every hub has a centre screw hole: a screw for surface mounting, or a cable gripper for hanging. Every arm has two brass sockets and a latch window. Kits ship with the V and Y connectors they need; I, L and T come with the Border kits; X is for custom grids.
From one hexagon
to a framed 8 × 16 ft bay.
1581114 Border15 BorderDrawing · hover for modelModel · rendered at true scale| HexBay 1 | HexBay 5 | HexBay 8 | HexBay 11 | HexBay 14 Border | HexBay 15 Border | |
|---|---|---|---|---|---|---|
| Order code | LCH-HB-01 | LCH-HB-05 | LCH-HB-08 | LCH-HB-11 | LCH-HB-14B | LCH-HB-15B |
| Size (in) | 36 × 31 | 96 × 67 | 96 × 100 | 96 × 132 | 96 × 190 | 96 × 190 |
| Hexagons | 1 | 5 | 8 | 11 | 14 | 15 |
| LED tubes | 6 × 18″ | 24 × 18″ | 35 × 18″ | 46 × 18″ | 57 × 18″ + 12 × 46″ | 60 × 18″ + 12 × 46″ |
| Power | 36 W | 144 W | 210 W | 276 W | 534 W | 552 W |
| Light output | 4,320 lm | 17,280 lm | 25,200 lm | 33,120 lm | 64,080 lm | 66,240 lm |
| Cords with plug | 1 | 1 | 1 | 1 | 2 | 2 |
| Cables if hung | 3 | 4 | 6 | 10 | 20 | 22 |
| Good for | Mirror stations, counters, an accent beside a larger grid | Barber chairs, a single work bay | Gaming lounges, studio corners, small retail | Motorcycle shops, display floors, gyms | Retail feature ceilings | Service bays, detailing, delivery bays |
Need a different footprint? Send the room's width, length and ceiling height. We return a layout drawing, parts list, power draw, and the cable count if it hangs — any number of hexagons, with or without a frame.
Send a room sizeOn the ceiling,
or hung below it.
Drawing · hover for modelModel · rendered at true scaleSurface mount
A screw through each hub into the ceiling. Anchors and screws are in the box.
Drawing · hover for modelModel · rendered at true scaleSuspended
For open ceilings — exposed joists, trusses, ductwork. One steel cable at each inner junction, up to a 5 ft drop. The outer corners hang free.
Suspension cable sets are sold separately. Cables per kit: 3 · 4 · 6 · 10 · 20 · 22.
Rooms where people
look closely at things.
The numbers,
side by side.
| PC build | Aluminum build | |
|---|---|---|
| Tube housing | Polycarbonate, white | Aluminum, silver |
| Body | Light, impact-tolerant PC | Rigid metal · won't yellow · draws heat off the LED board |
| Lens | Opal polycarbonate | |
| Light source | Integrated LED tube, aluminum PCB, driver inside | |
| Tubes | 18″ (440 mm) · 6 W · 46″ (1175 mm) · 16 W, Border frames | |
| Tube width | 22 mm | |
| Efficacy | 120 lm/W | |
| Colour temperature | 6500 K | |
| CRI | >80 | |
| Input | 100–277 V AC · not dimmable | |
| Connection | 5 ft cord with plug (Border kits: 2) · hard-wire by an electrician | |
| Location | Damp location · indoor use · IP44 splash resistant | |
| Mounting | Surface, or suspended on steel cable up to 5 ft | |
| Certification | Certified · certificates provided per project | |
| Warranty | 5-year limited | |
| Ordering | Made to order · quoted per project, any mix of kits and builds | |
Three steps
to a quote.
Pick a kit, or send the room
One of the six kits, or the room's width, length and ceiling height for a custom layout.
Pick the build
PC, or aluminum with its metal body and silver finish. Mix kit sizes and builds in one order.
Get the quote
Price, layout drawing, parts list, power draw and cable count, back by email.